"Real" Vintage Trees

‘Real’ Vintage Trees

Small selection of evergreen sprigs

Wooden rounds - I’ve used slices of birch branches

A handsaw (for sawing up the branches)

A drill with a 3mm bit

Florists wire


Slice your branch into rounds about 2cm thick.  Use whatever saw you have available. 

Using a drill and a small drill bit, drill a hole in the centre of the round.

Use a length of florists wire and wind it up the base of your every green sprig to help it stand up. 

Feed the sprig through the hole. 

Secure with glue if required.

Kat GoldinComment